Semitone Calculator

Semitone Calculator

01 Choose your pitches

Scientific pitch notation: middle C = C4. Calculations use 12-tone equal temperament.

02 Your pitch distance
—
semitones
Choose your pitches, then calculate.
Cents—
Frequency ratio—
Direction—
——

The calculation will appear here.

Settings & measurement notes

A4 defaults to 440 Hz. One octave doubles frequency; one semitone is 1/12 of an octave. Interval names are common equal-tempered names; harmonic spelling may differ.

Ready when you are.

Related tools

The Semitone Calculator measures pitch distance in half steps. Choose two notes, compare two frequencies or transpose a starting frequency by a signed number of semitones. Read the cents, ratio and direction together so a numerical result is clear enough to use in tuning, arranging or practice.

Choose the input that matches your information

  1. Select Two notes if you know both musical pitches and their octaves.
  2. Select Two frequencies if your inputs are hertz values.
  3. Select Transpose if you know a starting frequency and the desired shift.
  4. Calculate, then check direction and units before copying.

Note mode uses scientific pitch notation with middle C labeled C4. An octave-number mistake can add or remove twelve semitones even when the letter name is correct.

The calculator does not listen for notes or modify an audio file. It works with the numbers and note selections you supply. The Pitch Detector is the live-input alternative.

Understand half steps and cents

One equal-tempered semitone is the distance between adjacent chromatic notes. A whole tone contains two semitones, an octave contains twelve, and one semitone contains 100 cents.

The semitone is a frequency ratio, not a fixed hertz difference. Each upward step multiplies frequency by approximately 1.059463. The size of that step in hertz becomes larger at higher frequencies.

For example, one step above 220 Hz is approximately 233.082 Hz, while one step above 440 Hz is approximately 466.164 Hz. Both intervals are one semitone even though their hertz differences are different.

Count distances between notes

Subtract the first note’s MIDI number from the second. Eb3 is MIDI 51 and Bb4 is MIDI 70, giving an upward distance of nineteen semitones. The same endpoints in reverse give −19 semitones.

Count movements between notes rather than counting the starting note as a step. C4 to C4 has no movement and therefore zero semitones. C4 to C5 has twelve steps even though an inclusive chromatic list contains thirteen note positions.

DistanceSemitonesCents
Unison00
Whole tone2200
Perfect fourth5500
Equal-tempered perfect fifth7700
Octave121,200

The common interval name describes chromatic distance here. To distinguish spellings such as C–F# and C–Gb, use the Music Interval Calculator.

Calculate from a frequency ratio

For frequencies f1 and f2, semitones = 12 × log2(f2 ÷ f1). Cents = 100 × semitones. The displayed ratio uses the same input order, f2 divided by f1.

From 440 to 660 Hz, the ratio is 1.5 and the result is about 7.01955 semitones, or 701.955 cents. It is close to an equal-tempered fifth, but not exactly seven semitones.

This distinction matters when checking tuning systems or measurements. Do not round every frequency ratio to a whole-note step before examining the cents. The small difference may be the point of the calculation.

Reversing the example gives a negative distance and a ratio of two thirds. A negative sign means downward movement; it is not an invalid result.

Transpose a frequency by a fractional amount

The destination frequency is the starting frequency multiplied by 2 raised to the power of semitones divided by twelve. A +12 shift doubles frequency, while −12 halves it.

Fractional input is useful for a smaller adjustment. Moving 440 Hz upward by 0.5 semitone gives approximately 452.893 Hz. That is a fifty-cent shift, not half of a 440 Hz value.

Transpose mode calculates a frequency only. It does not change playback speed, preserve formants or produce a downloadable transposed recording. Keep that distinction clear when using the result in another audio workflow.

Use the result in singing practice

A semitone count can describe how far a melody needs to move, but it does not decide whether the new arrangement will feel comfortable. Check the melody’s low and high notes after the proposed shift.

The Vocal Range Calculator records comfortable endpoints. The Octave Range Visualizer shows their keyboard placement. These add practical context to a numerical shift.

Keep A4 consistent when named notes are involved. If you change an input, calculate again before using Copy result. Reference playback is limited to the supported playback range; a numerical result can remain useful when playback is unavailable.

Frequently asked questions

How many cents are in a semitone?

There are 100 cents in one equal-tempered semitone. A whole tone is 200 cents and an octave is 1,200 cents.

How many semitones are in an octave?

Twelve. The frequency ratio for that distance is two to one.

Can the result contain decimals?

Yes. Arbitrary frequencies and fractional transpositions need not land on a whole semitone. Preserve enough precision for the task you are checking.

Does A4 tuning change the distance between two notes?

Changing A4 scales the assigned note frequencies together. It does not change the semitone count between the same selected notes.

Can I enter a voice sample here?

No. Use the Voice Hz Test for a sample summary or the live detector for an individual pitch, then bring relevant numerical values to this calculator.

Scroll to Top